Michigan Builders License Practice Exam

Browse all practice questions for the Michigan Builders License Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Start practice testFlash cards
Michigan Builders License Practice Exam course image
Calculating Board Feet in Lumber Made EasyHow is the number of board feet in lumber calculated?Exploring the Benefits of Compression After Mortar ApplicationWhat effect does applying compression after the application of mortar have on the seam created?Latex paint characteristics: fast drying, low odor, good adhesion, and exterior suitability explainedWhich of the following is NOT a characteristic of latex paint?Understanding Construction Joints in Concrete PouringWhat usually indicates the need for a construction joint?Understanding Fire Blocking Requirements for WallsFire blocking can be required in walls over what height?Understanding How Moisture and Temperature Affect ConcreteThe right amount of moisture and limitations with regard to excessive heat or cold impact which of these in regards to concrete?Understanding natural stone tiles for builders: what makes slate and other stones stand outWhich natural stone tile is most commonly used?Understanding Project Managers' Role in Scheduling Inspections and PermitsWho is primarily responsible for scheduling and tracking inspections, permits, and licenses?Understanding the Core Elements of a Valid ContractWhat is generally included in the elements of a valid contract?Understanding the Coverage of the Americans with Disabilities Act for AIDSAn individual diagnosed with which condition is covered under the Americans with Disabilities Act?Understanding the Elements of Floor Framing in ConstructionWhich of the following is NOT considered an element of floor framing?Understanding the Essentials of a Hazard Communication ProgramA comprehensive Hazard Communication program includes which of the following?Understanding the Factors Affecting Mortar AdhesionWhich aspect is considered when assessing the porosity of surfaces for mortar adhesion?Understanding the Importance of Errors and Omissions Insurance for BuildersWhat is another term for professional liability insurance?Understanding the Importance of Flashing for Chimney and Wall IntersectionsWhat must be installed at the intersection of chimneys or other masonry construction with frame walls?Understanding the Importance of Surface Drainage for Your FoundationWhat is the required surface drainage slope away from a foundation wall?Understanding the Importance of the Construction Lien Act for BuildersWhat is the purpose of the Construction Lien Act enacted in 1980?Understanding the Importance of the Uniform Arbitration Act for Civil Dispute ResolutionThe Uniform Arbitration Act is designed to encourage resolution of civil actions through what means?Understanding the Importance of Wall Tie Embedment in Masonry UnitsWhat is the minimum engagement of wall tie embedment in solid masonry units?Understanding the Key Role of Quality Control in Construction ProjectsWhich process is important for ensuring quality across a construction project?Understanding the Monthly Tax Deposit Requirement for Employers in MichiganWhat is the required frequency for making deposits of taxes withheld at a minimum?Understanding the Risks of Installing New Shingles on an Old RoofWhich of the following is a concern when installing a new layer of shingles on top of an old layer?Understanding the Role of Anchor Bolts in Supporting Structural PostsAnchor bolts are embedded in walls to support which of the following?Understanding When Above Deck Thermal Insulation is PermittedUnder what condition is above deck thermal insulation permitted?Understanding Where to File a Complaint Against a Residential Builder in MichiganWhere is a complaint against a residential builder typically filed?What ensures a Certificate of Occupancy in Michigan? It’s all about code complianceWhich factor is important for the acceptance of a Certificate of Occupancy?What truly controls concrete strength and why the water-cement ratio mattersWhat is the chief factor controlling the strength of concrete?What you need to know about crazing in concreteWhat does crazing in concrete refer to?What You Need to Know About Ridge Boards in Roof ConstructionWhat is the name of the horizontal piece that connects the upper ends of the rafters?What You Should Know About Over Dig in Michigan ConstructionThe additional excavation needed to provide clearance for work is known as what?Who Should Call MISS DIG Before Digging?Who is responsible for calling MISS DIG for the proper location of underground services before digging?Why a vapor barrier goes beneath a pressure-treated sill and concrete slabWhat material should be placed beneath a pressure-treated sill and the concrete slab?Why Compliance with Building Codes Matters for ContractorsWhat is often required from building contractors to prevent faulty construction?Why Proper Planning and Scheduling Matters in ConstructionImproper planning and scheduling can lead to which of the following?
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is a requirement applicants must fulfill for a residential builder or maintenance and alteration contractor salesperson license?
  • When assessing an existing building for reconstruction, what source of information is typically NOT used?
  • What is the term used to describe the maximum spacing allowed between various sizes of joists or rafters?
  • Why is it advisable to maintain separate ledgers for short-term and long-term accounts receivable?
  • What is the term for the sand added to a cement mixture?
  • A vertical mortar joint is known as a _______?
  • At what minimum outdoor temperature should oil-based paint be applied to exterior surfaces?
  • When installing a suspended ceiling, how far must the top edges of the grid system be below the bottom of the ceiling framing?
  • Which of these is included in material costs?
  • Businesses with more than 50 full-time employees that don't offer insurance may be subject to what payment?
  • Which of the following should NOT be included in a change order?
  • During ceiling installation, the grid system must be positioned at least how many inches below the ceiling framing?
  • Which of the following statements about riders is true?
  • CMUs are often used in all except?
  • How many days do subcontractors have to provide a "notice of furnishing" after the first delivery of goods or services?
  • Where must a state license be displayed according to regulations?
  • Which of the following applies to unfilled hollow masonry piers supporting a beam?
  • Which type of block does not require formwork for solid concrete foundation walls but requires reinforcement?
  • What does the balance sheet summarize?
  • When does a party breach a contract?
  • In project planning, maintaining documentation is necessary for which primary reason?
  • Which of the following is NOT an element of laying a concrete slab on grade?
  • What type of brush is recommended for painting window trim?
  • A cash flow statement details which of the following?
  • What type of valley uses interwoven strip shingles for protection against seepage without the need for metal flashing?
  • What is a filler product with high water content?
  • A perc test is used to measure the what of soil?
  • Which is not a possible penalty for failing to provide workers compensation coverage?
  • How much should each strip of underlayment for shingles overlap the previous strip at all end joints?
  • When is a plain butt joint acceptable for a slab?
  • What is the minimum required distance for water drainage slope away from a foundation wall?
  • Who is responsible for addressing complaints against builders?
  • What is the purpose of an expansion joint in a sidewalk or walkway?
  • An occupational injury and illness log must be kept at every job site for businesses with more than how many employees?
  • If a contractor receives an invoice of $5,269 with terms of 2/10 net 30, what is the amount due if processed by December 9?
  • The maximum distance allowed between the gutter's high point and the downspout is typically no more than what?
  • What type of drawings are characterized by larger scales and specific details?
  • According to typical building practices, what is crucial for the function of gutters?
  • What is another term for a combined construction loan and mortgage?
  • Which financial statement shows a business's financial condition during a specific period of time?
  • Which document governs the payment process for construction projects in Michigan?
  • What term gives the owner the right to require corrections in work performed?
  • Cost management is closely tied to which other aspect of management?
  • Which is an essential element of a contract in construction?
  • Which of the following is NOT a good technique to maintain soil function and vegetation around a job site?
  • Job-site meetings with building inspection officials should include which activity?
  • When grading a plywood panel, what method is used that considers veneer quality and dimensions?
  • The remaining amount after deducting all costs from revenues is known as what?
  • What must builders provide when completing the Certificate of Occupancy?
  • When installing board paneling, what angle should the first board be undercut?
  • What type of footing is appropriate for a lot that slopes?
  • When self-insuring, accident insurance can be an alternative to which type of insurance?
  • What is the best bookkeeping practice for a contractor managing multiple projects?
  • What type of flashing is preferred to use behind brick in a wall?
  • What should Liam the contractor have installed to prevent the collapse of the excavation?
  • What consequence results from failing to comply with an audit by the department?
  • Which statement best describes net total profit?
  • Which of the following applies to unfilled hollow masonry piers supporting a beam?
  • What is typically found that must be inspected before demolition begins?
  • What is a key requirement for contractors operating in Michigan according to licensing laws?
  • A contract made while under the influence of alcohol is considered to be what?
  • What is the clearance of a joist from the back face of a masonry chimney?
  • What is the minimum compressive strength of concrete for a garage floor slab in severe weathering conditions?
  • In which scenario would a grading and drainage permit be required?
  • What is the maximum thickness for the joints when laying firebrick using refractory cement?
  • Flashing is so important in brick masonry because?
  • What type of tax is deducted solely from employees' wages?
  • Which of the following is essential for maintaining a proper complaint process in Michigan?
  • What should be installed over plywood before laying more ceramic tile?
  • What must be present in a contract for it to be enforceable?
  • What does a balance sheet primarily show?
  • What is considered the most critical aspect of a contractor's job?
  • What is one way contractors can ensure compliance with workers compensation laws?
  • A description or identification of the materials to be used in a project will be found in the project _________.
  • What building component do anchor bolts NOT support?
  • Which type of contract allows the project to start before all plans are complete?
  • Which tool is typically used by a contractor to complete grading?
  • Footings should be placed at a minimum depth of how many inches below grade in cold climates?
  • Which type of Plan allows for a house to be sliced vertically to see information about materials, fastening, and support systems?
  • What defines a contract between parties?
  • A Michigan employer is required to provide which of the following for adult employees?
  • What factor affects the adhesion of mortar to surfaces, specifically not applying to the curing of cement?
  • The temperature of new concrete should not be allowed to fall below ______ F during the curing period?
  • Which organization should be contacted to ensure proper location of utility services before excavation?
  • How can a type of insulation's R-value increase?
  • How long should a contractor maintain documents related to a contract?
  • What type of complaint can be managed by the Michigan Bureau of Professional Licensing?
  • What is Form W-3 used for?
  • What type of erosion and sedimentation control measures are removed once permanent measures are installed?
  • What is a common practice for ensuring the reliability of materials during a construction project?
  • Why is flashing particularly important in brick masonry?
  • Pre-cut insulation within a membrane is usually referred to as what?
  • Which of the following is NOT a term associated with fake stone products?
  • What is the term for a building element's resistance to the passage of sound?
  • Which of the following is NOT a quality control step?
  • What construction method can save time compared to pouring concrete?
  • Which of the following would not constitute grounds for a complaint against a licensee?
  • What specific preparation technique is important when working with mortar?
  • Horizontal dimensions on a building plan can be found on the ________.
  • Which option describes the acceptance of an offer?
  • Which tool is optimal for applying paint in tight spots around trim?
  • What type of insurance covers up to $1,000,000 in property damage?
  • In excavation work, what is a key concern when preparing a site?
  • Which party typically secures the construction loan for a project?
  • What is an effective way for a general contractor to manage subcontractor challenges?
  • Which of the following services does professional liability insurance not typically cover for contractors?
  • In which conditions is sound insulation particularly important in a building?
  • Which piece of information is NOT required on a Certificate of Occupancy?
  • What are changes to project documents made before bid acceptance called?
  • Which of the following is NOT covered under property insurance?
  • Which tax is paid entirely by the employer and not deducted from employee earnings?
  • What is the primary purpose of tamping rods in concrete testing?
  • What is a common requirement for a contractor's performance bond?
  • How is roof pitch expressed?
  • Which document often outlines the agreement between a builder and the homeowner?
  • What do detail drawings primarily include?
  • Which project costs typically do not need to be estimated?
  • Which legislation is regulated by the Equal Employment Opportunity Commission?
  • Why is blocking used in the installation of cabinetry?
  • What safety measure should be considered when using oil-based paints outdoors?
  • What is required for a contract to be considered valid?
  • What is the recommended temperature range for installing shingles?
  • What type of insulation is characterized by its flexibility and fit into odd-shaped areas?
  • What is insulation made from material that expands as it is installed commonly referred to as?
  • What must be conducted in new construction to ensure that there are no claims against the property?
  • What is the anchorage requirement for a wood sole plate?
  • Ice shields are required when using which roofing material at an average daily temperature of 25°F?
  • How might builders demonstrate their compliance with local regulations?
  • Where can information about window and door specifications typically be found?
  • What type of activities fall under Class II asbestos work?
  • In an estimate recap, takeoff items should be sorted into all of the following categories except which one?
  • What is the mortar joint thickness tolerance from the specific dimensions for a bed joint?
  • When applying mortar, what should be done with excess mortar?
  • The most common endorsement modification to a CGL policy is known as what?
  • Which of the following is NOT a common admixture in concrete?
  • What is the first step in finishing a concrete slab?
  • Why are trusses designed in a triangular shape?
  • A ________ is a built-out portion of a wall that forms a bulge.
  • Which product is categorized as a filler with a high water content?
  • In a solid concrete foundation wall, anchor bolts for the sill plate should be spaced no more than how far apart?
  • The seal and signature of an architect or professional engineer is required on construction documents for any one or two family dwelling project over _____ square feet.
  • What is a turnkey contract?
  • What must subcontractors provide to protect their rights to a construction lien?
  • What characteristic does a fire-retardant material provide in construction?
  • What is the primary purpose of Addenda in a contract?
  • The temperature of new concrete should not be allowed to fall below ______ F during the curing period.
  • Which accounting method could lead to less clarity regarding financial conditions due to more record keeping?
  • What type of manufacturing sometimes incorporates ceramic fiber for fire retardance?
  • Businesses with more than 50 full-time employees that don't offer insurance may be subject to what payment?
  • Additions to property insurance that provide extra coverage for unforeseen issues are called what?
  • In contract terms, what does 'consideration' refer to?
  • CMUs are often used in all these except:
  • What tax is deducted solely from employees' wages?
  • When might discrepancies occur in accounts receivable?
  • What is the primary difference between faced batts and unfaced batts?
  • In an administrative hearing, which two entities have legal standing to participate?
  • When must a contractor deposit FUTA taxes if their liability exceeds a certain amount?
  • How much should metal gutters slope minimum per length?
  • In which case can a salesperson procure a contract without being licensed under a builder or contractor?
  • Which type of bond guarantees that construction materials will be paid for?
  • How does a contractor ensure compliance with Michigan construction safety regulations?
  • What type of breach occurs when a contractor fails to clean the job site adequately?
  • What type of insulation is often preferred for its ease of application in small spaces?
  • What contributes the largest percentage to a concrete mix?
  • What type of wall foundation utilizes a series of concrete pillars for support?
  • Which of the following is not a reason why green building materials are becoming more affordable?
  • Contractors are advised to maintain which type of document for every project?
  • What document summarizes cash inflows and outflows during a specific time period?
  • Which of the following is a common characteristic of spray-foam insulation?
  • According to Michigan Barrier Free ramp guidelines, what is the required ramp slope ratio for a 30-inch rise?
  • When submitting construction plans to the local building department, which of these does not need to be included on the cover sheet?
  • What is the purpose of placing insulation in a building?
  • According to Michigan residential code, a permit is required for which of the following actions?
  • What kind of contaminants are found in traditional building materials and absent from green building materials?
  • Builders risk insurance protects the contractor against what?
  • Why is it essential to minimize the aspect of excavation ahead of laid pipe?
  • Which of these incidents would NOT need to be reported within 24 hours?
  • A bond that protects a contractor from dishonest employees is known as what?
  • What does grubbing involve when preparing a site for excavation?
  • What is the best practice for matching income and expenses for tax purposes?
  • What document is essential for summarizing the operational results of a business over a fiscal period?
  • What should be done first when installing wood flooring?
  • What is a construction joint used for?
  • Which component is not typically included in a labor table?
  • What is the primary concern when building masonry structures in cold climates?
  • A _________ schedule shows the materials and finishes featured in each room's floors, walls, and ceilings?
  • What is the consequence of not having separate ledgers for various receivables?
  • What is the maximum spacing of studs supporting 1/8" wood veneer paneling?
  • Tracking project milestones is crucial for which reason?
  • The most basic type of concrete panel is the what?
  • When cultured stone began to take over the market, natural stone producers created this product to counter.
  • What must all advertising from contractors include?
  • Which flame spread rating is applicable to insulation?
  • What is a notable disadvantage of the accrual method of accounting?
  • What is the purpose of weepholes?
  • Which of these does NOT qualify as "Specialty drywall"?
  • Which of the following is NOT a good strategy for ensuring that subcontractors are financially sound?
  • Personal car insurance policies often exclude coverage for what in the event of an accident?
  • Which method is NOT typically used for demolishing a recently occupied house?
  • What material is commonly installed behind brickwork to manage water flow?
  • When a homeowner submits a complaint to the building department, what must they also do?
  • What distinguishes quality control from quality assurance?
  • What term describes the increase in volume of dirt after excavation?
  • Regular communication with subcontractors can lead to what benefit?
  • What is the term for a flat metal or wood pad used to create an even surface on concrete?
  • When depositing water after dewatering a site, what is crucial to remember?
  • What is the term for trim around a doorway or window?
  • What is the purpose of temporary erosion control measures during construction?
  • Which of these is NOT another term for fake stone products?
  • Which of these materials should you NOT use to form slab edges for a monolithic slab?
  • Which type of brick is recommended for use in walkways?
  • Which paint type is often recommended for exterior surfaces due to its durability?
  • Which of the following is NOT a type of cornice?
  • What is the ideal riser height for stairways according to building standards?
  • Why should wood flooring be acclimated before installation?
  • When would a construction joint typically not be used?
  • What is an advantage of concrete brick compared to paver brick?
  • Michigan Labor Laws require employers to provide employees under _____ with a 30 minute rest period if scheduled more than 5 continuous hours.
  • What is the mortar joint thickness tolerance from the specified dimensions for a bed joint?
  • What is the most commonly recommended maximum distance between fasteners when installing drywall without adhesive?
  • How do you calculate the working capital ratio if current assets are $30,000 and current liabilities are $15,000?
  • What is the ratio between the size of the object as drawn and its actual size called?
  • What factor does NOT influence a wood's ability to accept a finish?
  • How long must wood flooring be allowed to acclimate?
  • Which of the following is an important aspect of cost management?
  • When pouring a monolithic slab, the minimum height for the top of the slab should be how many inches above the ground?
  • What is the purpose of a balance sheet?
  • Before beginning demolition, an inspection must be made to determine the presence of all materials except?
  • Which of the following is true about the R-value of insulation?
  • Under each load-bearing wall that is parallel to the joists, the joists should be what?
  • Businesses in Michigan with multiple locations must obtain what for each location?
  • Which option is not considered one of the basic styles of roof?
  • What is the minimum number of coats of Portland plaster required on the exterior over masonry?
  • What are the two key elements that must be scheduled when constructing a home?
  • To facilitate the installation of baseboard, crown, or other molding, what should be provided at the ends during framing?
  • What is the minimum engagement of wall tie embedment in solid masonry units?
  • Which type of management involves understanding the financial and human resources required for a project?
  • Fastening schedules are used to show what in terms of structural design?
  • What is the typical duration of a warranty period for a construction project?
  • When ensuring that an excavation does not extend too far ahead of the laid pipe, what should be minimized?
  • When might a building's existing liens be irrelevant during reconstruction planning?
  • When trenching, the width below the top of the pipe should be no more than how many feet larger than the outer diameter of the pipe?
  • Effective budget management is essential for a project's what?
  • What should always be checked before beginning excavation work?
  • What is the minimum width of a foundation for a two-story light frame house built on clay soil?
  • What is foam in place insulation primarily used for?
  • What kind of material is typically used for a vapor barrier in a construction project?
  • What should contractors be aware of if they have a FUTA liability greater than a specified amount?
  • A straight run of stairs is known as what?
  • If a Michigan employer wants to self-insure, what type of insurance must they obtain?
  • What is the formula to calculate the gross profit to sales ratio?
  • What is the main benefit of using Type N mortar?
  • What is a common practice for mitigating water runoff after dewatering?
  • Which of these is covered by workman's compensation?
  • What is another term for comprehensive general liability insurance?
  • Cindy is unsure which type of mortar to use for repairing unsightly cracks in her brick patio. Which type would be her best option?
  • How long should a concrete slab cure before installing hardwood flooring over it?
  • In a construction plan, a section view would be named with a/an ______.
  • What does the statement of income primarily show?
  • Which type of mortar would be used for work below grade?
  • What impacts concrete regarding the right amount of moisture and limitations of excessive heat or cold?
  • What is the typical function of flashing in masonry work?
  • In the event of a complaint, what role does the license in question play?
  • How many strokes of the tamping rod are required when performing a slump test?
  • What is the minimum size and location of rebar in a footing for a monolithic slab?
  • What is another term for blown-in insulation?
  • Which contract document must be signed by both the owner and the contractor?
  • What is the required clearance of a joist from the back of a masonry chimney?
  • What is another term for an income statement?
  • What is required for a licensed contractor in Michigan to operate legally?
  • What is the most effective strategy for procuring materials for a project?
  • In property insurance, what is typically covered under the term "dwelling"?
  • What tax is deducted not only to fund Social Security but also Medicare?
  • What condition can lead to failure in mortar adhesion?
  • Which of the following is not acceptable as proof of a legal right to work in the U.S.?
  • What does a known damage endorsement on a CGL policy specifically cover?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy